Hey Guest!
Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
OP
JimTR4
Senior Member
Offline
Hi,
sorry to bump this but...
so I have everything back together again. New oil line to gauge, new washer. Still leaking. Can only assume it's the gauge connection itself. Doesn't look real bad but a bit gnarly I guess.
I'm thinking of using my electric gauge instead and putting a sender into the adaptor mentioned before and into oil gallery.
question: any thoughts on best way to blank off oil pressure line? Just cap off the fitting where the oil line goes/went at the filter end?
thanks in anticipation.
sorry to bump this but...
so I have everything back together again. New oil line to gauge, new washer. Still leaking. Can only assume it's the gauge connection itself. Doesn't look real bad but a bit gnarly I guess.
I'm thinking of using my electric gauge instead and putting a sender into the adaptor mentioned before and into oil gallery.
question: any thoughts on best way to blank off oil pressure line? Just cap off the fitting where the oil line goes/went at the filter end?
thanks in anticipation.