• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Tips
Tips

E Type 4.2 engine rebuild

Share this page

M

midnight

Senior Member
Offline
Any suggestions for a rebuild shop for a 1968 4.2 jag rebuild - motor runs good (95,00 miles), but rear main seal leakes badly - I'm in reno, nv - midnight
 
If the only thing wrong is the rear main, trans can be removed and replace rear seal. Might take front suspension drop and oil pan, but a lot cheaper than a rebuild. I'm not in Nev., so shops not known to me.
 
XKs is expensive, and so is the Jag place in idaho. Have you tried inquiring with the local Jag Club and see what the area members use?
 
I had mine rebuilt by Dick Maury at Coventry West: https://www.coventrywest.com/rebuilt-jaguar-engines

They are in Georgia, I am in Tucson - but their reputation and seeing a friend's engine they had done convinced me to send it to them.

Not difficult, I laid it on an old tire on a 4x4 pallet and strapped it down. They arranged shipping - about $300 each way which is not much in the grand scheme of (Jaguar) things.

NY2ulVy.jpg


About 8 weeks later:

vmZeL8a.jpg
 
Back
Top