-
Hi Guest!
You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.
There are some perks with a member upgrade!**Upgrade Now**
(PS: Subscribers don't see this gawd-aweful banner
Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
Door Lock Tumbler
- Thread starter dwneumann
- Start date
Share this page
Offline
I can't help you with installing the tumbler (I have a BN4), but I recommend not ever using the door lock. Replacing a slashed top is too expensive.
Offline
It’s been several years, but I think you need to remove the door panel to get to the machine screw that has fallen out. Find the screw and then put it all back together.
Healey Nut
Luke Skywalker
Online
There’s a small machine screw that goes into the back end of the tumbler. Yep, the door panel is coming off. Have fun getting those handles off and back on again.
Chances are also good that you will break some of the spring clips that hold the door panel on too.
Chances are also good that you will break some of the spring clips that hold the door panel on too.
