• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Tips
Tips

Distributor Removal....Precautions?

Share this page

R6MGS

R6MGS

Yoda
Offline
Got the TC block ready for paint, but want to remove the distributor to clean it up aswell....Don't want to lose the timing as it ran great before we stripped it down. What precautions should I take to ensure I don't lose the timing? Also I only see one lockbolt holding it in place, is that all there is?

Thanks
/ubbthreads/images/graemlins/cheers.gif
 
One Lock bolt must be correct if that is all you see. If the engine is not rotated you will not loose the timing.Just mark the Dizzy and the block to establish the physical location of the housing before removal. Minor adjustment will be required after start up---Fwiw---Keoke
 
Thanks....Thats what I thought...Just wanted to make sure /ubbthreads/images/graemlins/wink.gif
 
Back
Top