• Hi Guest!
    If you appreciate British Car Forum and our 25 years of supporting British car enthusiasts with technical and anicdotal information, collected from our thousands of great members, please support us with a low-cost subscription. You can become a supporting member for less than the dues of most car clubs.

    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

Distancing Task #2 - organizing car stuff.

JPSmit

Moderator
Staff member
Silver
Country flag
Offline
I have a binder full of original colour chips from back in the day. Each page is punched with a 5 hole punch. However the binder has only 3 rings. This would not be a problem except some of the 'three holes' are weak and broken. So, I am trying to find a 5 ring binder.

Anyone know where I can get one? If you google you typically get a 5" 3-ring binder.

I did manage to find a medical one but then realized it has the rings on the narrow side so it can flip open.

any thoughts?

thanks all!
 
is there enough room to trim the pages and re-punch for three-rings?
if there is, you could take them to a small printing company and they could trim them on a guillotine cutter.
Just a thought...
 
is there enough room to trim the pages and re-punch for three-rings?
if there is, you could take them to a small printing company and they could trim them on a guillotine cutter.
Just a thought...

Sorry I said it wrong - it fits a 3 ring perfectly - and is in one now. Back in the day the binders the old time parts stores had on the counter with parts numbers typicall had 5 - 2 extra. So, it is fine now but would love to find the proper binder. (Does that make sense)
 
Sorry I said it wrong - it fits a 3 ring perfectly - and is in one now. Back in the day the binders the old time parts stores had on the counter with parts numbers typicall had 5 - 2 extra. So, it is fine now but would love to find the proper binder. (Does that make sense)
Ok, makes more sense now.
 
FWIW, any office supply place can sell you reinforcements for the holes. Basically a round piece of clear adhesive tape, with the hole already punched. I use two of them, one on each side, so they stick together where the original paper is missing. Seem to work pretty good.

Sorry, no help on where to buy a 5 ring binder.
 
Back
Top