• Hi Guest!
    You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.

    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

Disk Brake Dust Covers

Monark192

Jedi Warrior
Offline
I'm installing the rebuilt a-arms etc from Eric Jones to convert my 62 to disk brakes. The dust covers that came with the original conversion parts from Ebay are rusty and bent. Are these parts necessary? At the risk of asking an obvious question - what do they do?
 
Great question, Simon!

I'm doing the same on my '62 Sprite (disc brake conversion)and have the same question. I will have the opportunity to put the car on a lift regularly to clean and inspect the running gear that is so often neglected. I'm leaning toward not reinstalling the covers. I know the racers don't use them (maybe not all) and while their situation is different, the premise is similar...much more scrutiny for limited use.

I'm interested as well to see what the experts say.

Ray
 
My new (VERY EARLY)1959 AH 3000 didn't come with the brake shields from the factory. Pad mileage varied from 900 to 1500 depending on the weather and the season. Later 3000's had the shields for obvious reasons. Yes, you do need them. Bob
 
All my Sprites do NOT have those dust shields.
They all came with them but they do not serve any noticable purpose.
And now I have a milk crate full of them.
 
They look like part # 8 below
 

Attachments

  • 9359.gif
    9359.gif
    17 KB · Views: 121
Hmm - one yes, one no. I am thinking of leaving them off - well, not ordering new ones to install I guess - and keeping a close eye on pad wear.
 
I have to add some info to my rant above on the lousy performance of the shieldless disc brake pads on my AH3000. Firstly the Healey had terribly small brake pads to start with considering the weight and performance of the car. Secondly I drove the car all winter in snow, sand, and salt. Also it was driven hard and autocrossed every opportunity I had. My point above was that it only took the factory a few months to recognize their mistake and add the shields to the 1960 models. A Spridget driven sanely, in good weather, and moderate annual distances MAY not need the shields. Bob
 
Sweet...two less parts to strip and paint. It must be disk brake conversion season. I'm in the middle of converting my '62'.
 
Back
Top