• Hi Guest!
    If you appreciate British Car Forum and our 25 years of supporting British car enthusiasts with technical and anicdotal information, collected from our thousands of great members, please support us with a low-cost subscription. You can become a supporting member for less than the dues of most car clubs.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

Differential question

Share this page

jcatnite

jcatnite

Jedi Knight
Offline
I recently came in to possesion of a 3.9 differential to replace the 4.22 in my 76 Midget. As far as the wear pattern on the crown gear and pinion, I was very happy when I unpacked it. Upon further inspection, the differential gear on the crown side seems to float quite a bit. There isn't any play in the pinion bearing but there is a lot in the gear. The other side doesn't have near as much play but there is a little. I'm not sure if this is an issue or not. I would think the axle will support the gear but the movement concerns me. Any experience out there with a similar situation?
Thanks,
JC
 
Back
Top