• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Tips
Tips

DECALS and COLORS

Share this page

andrea

andrea

Jedi Knight
Country flag
Offline
Here you can find some DECALS for the Austin Healey
..washer bottle cap and more
https://picasaweb.google.com/lh/photo/FbbGGFhuvgLwUcYwXu0gwtMTjNZETYmyPJy0liipFm0?feat=directlink
and/or https://picasaweb.google.com/112770...AndCOLORS20Dic2012?authuser=0&feat=directlink
it must be printed on A4 waterslide decal inkjet paper and then sprayed by transparent gloss

on PPG EASY CONECT System- inside ROVER GROUP
I have find the COLORADO RED RD2 for my car
https://picasaweb.google.com/lh/photo/uG01hi5v41imLsqgvRmjyNMTjNZETYmyPJy0liipFm0?feat=directlink
and also the Healey Ice Blue and more
https://picasaweb.google.com/lh/photo/OsHY281hHfo1qqDr4aRvYNMTjNZETYmyPJy0liipFm0?feat=directlink
:peaceful:
MERRY CHRISTMAS and NEW YEAR to all members
 
Last edited:
Andrea,

WOW, the red colour is wonderfull

Hans
 
.............................Here you can find some DECALS for the Austin Healey
washer bottle cap and more
https://picasaweb.google.com/lh/photo/FbbGGFhuvgLwUcYwXu0gwtMTjNZETYmyPJy0liipFm0?feat=directlink
and/or https://picasaweb.google.com/112770...AndCOLORS20Dic2012?authuser=0&feat=directlink
it must be printed on A4 water slide decal ...........

PRINT WARNING
water slide decal paper are very difficult to determine the correct printing side of the sheet
- AFTER my first experiment i have find that I have printed the correct side for DECALS1--BUT the WRONG side for the DECALS2
In Italy WSDP sheets are expensive-and I am from one Italian district famous for contest with Scottish and Jewish on money matter.
So I was very distressed -
BUT I am safe, so please don't worry -for the test I have cut only one little section of the print- so I have reversed the sheet on
the other side and have reprint it -and then re-sprayed with transparent gloss paint
So I suggest a LOT of attention before the printing operations
- you can attempt to divide one little corner of the sheet (you must have sharp nails or one girl)
- you can cut one little corner of the sheet (better if in the lower part) and divide it dip on water (remember: mark one sheet side, before)
- or as me test one little section AFTER the printing:stupid:
in every occasion remember that decals must be divided before the application-store it in one box

:peaceful:
MERRY CHRISTMAS and NEW YEAR to all members
 
​PRINT WARNING TWO
After the first applications I have find one more trouble on my work-
I have used water slide transparent decal paper-
so if decals are applied on white surfaces all is good
but on dark surfaces the result are very bad - and contents are confuse and not readable
water slide WHITE decal paper- must be used for GOOD result
it exist here one example -I haven't no commercial or professional intent

https://www.texascraft.com/hps/home.php?cat=250&sort=orderby&sort_direction=0&page=2

 
Back
Top