T
Tinster
Guest
Guest
Offline
Well, I've been gutting the Crypt Car's insides in
preparation of Paul's arrival to change out the
clutch. Can anyone believe I am still uncovering
miles of speaker wires? BLUUUFFF!
It appeared to me the dash support unit would have
to come out in order to remove the transmission.
So I took it out. It was ratty looking anyway.
I started to take it apart to refurbish it and found
some interestings markings. "TR5-SCK " was written
on the underside of the foam liner. Also I found 3 holes
punched in the steel housing that are not visible from
the drivers side. Covered over with fake leather.
The big hole for the radio and 2 knob holes are obvious.
Does anyone know what the other 3 holes were used for?
And any suggestions on how to refurbish this dash support beast?
regards,
dale
preparation of Paul's arrival to change out the
clutch. Can anyone believe I am still uncovering
miles of speaker wires? BLUUUFFF!
It appeared to me the dash support unit would have
to come out in order to remove the transmission.
So I took it out. It was ratty looking anyway.
I started to take it apart to refurbish it and found
some interestings markings. "TR5-SCK " was written
on the underside of the foam liner. Also I found 3 holes
punched in the steel housing that are not visible from
the drivers side. Covered over with fake leather.
The big hole for the radio and 2 knob holes are obvious.
Does anyone know what the other 3 holes were used for?
And any suggestions on how to refurbish this dash support beast?
regards,
dale
Hey Guest!
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 