• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Tips
Tips

dang radiator broke

Share this page

usaflm

usaflm

Freshman Member
Offline
Started pulling my radiator to change the water pump. Tried to remove the coolant temp sensor from the passanger side of the radiator. SNAP! Broke the whole assembly off, the sensor is sezed in the threads where it screws into the radiator. Can I have that piece of the radiator welded back on or am I looking at a new radiator?
 
It very likely can be repaired. Check for a good radiator shop in your area.
 
As Trevor said, take it to a radiator shop. They brazed mine back on for a couple bucks.
 
That nipple was soldered in originally.
If you have a torch and some solder, or know a plumber, it's a simple fix.
I have soldered a couple of mine in the past.
 
Back
Top