• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)

Correct Timing Settings

Share this page

R

Ray Smith

Jedi Hopeful
Offline
I have some questions regards timing on my BJ7 with a strobe light:

1: RPM setting

2: Vacuum line connected or disconnected

3: How many degrees of dwell

4: Is the timing set BTDC or after TDC

Thanks, Ray
 
Hi Ray,
The BJ7 factory specs show;
Rpm = 600
Timing = 15 degrees BTDC
Dwell = 35 degrees at .014" to .016" point gap
Vacuum advance disconnected
Static timing should be 10 degrees BTDC
D
 
Back
Top