• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Tips
Tips

TR2/3/3A Control head Lubricant?

Share this page

That Lucas masterpiece (tongue in cheek) was designed with the best materials available in the
50s. If they lubed it at all, it was with a petroleum based product. Plenty of entry holes for dirt
and dust to leak in, especially since it's on an open car. The few that I have taken apart were
caked with what looked like Cosmoline™ It was probably just a dirt/dust and oil mix.
When I did mine, after getting everything sweaky clean, I sprayed it with the best pure (food grade)
silicone spray that I could find. That was 20 years and 90K+ top down touring with no problems.
Frank

 
Hi Frank,

i still have'nt got to the gauges! Soon!

Regards, Russ
 
GerryL said:
What would be the recommended lubricant for use in rebuilding control head?
Click to expand...

Very light treatment of the sliding parts wit Coppa-Slip.
 
Back
Top