Hi Guest!
Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
I am rebuilding a 1976 MG-B that I purchased non-running. There are a few 'modifications' to the electrical system, particularly in the motor compartment.
I found a module that is mounted on a bracket or the R/H side of the engine bay just ahead of the heater blower. There is a 'speedo type' cable from the transmission that goes into the bottom & another speedo type cable that goes from the top of the module to the speedometer. There is also a black sheathed wire set about 30 inched long coming out of the back of the module with a dark green wire with a male connector and a light green with a white stripe & female connector .
I have been unable to find a connecting harness / plug for these wires, either under dash or in the motor compartment.
Any ideas?
THANKS!
I found a module that is mounted on a bracket or the R/H side of the engine bay just ahead of the heater blower. There is a 'speedo type' cable from the transmission that goes into the bottom & another speedo type cable that goes from the top of the module to the speedometer. There is also a black sheathed wire set about 30 inched long coming out of the back of the module with a dark green wire with a male connector and a light green with a white stripe & female connector .
I have been unable to find a connecting harness / plug for these wires, either under dash or in the motor compartment.
Any ideas?
THANKS!