• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Tips
Tips

TR4/4A Cold air intake system

Share this page

TRMark

TRMark

Jedi Knight
Bronze
Country flag
Offline
Been thinking of building a cold air system for the TR. I see Moss has provides one for the MG. https://www.mossmotors.com/Shop/ViewProducts.aspx?PlateIndexID=120957 Thinking about just a simple box with a universal tube and filter attached. I don't think I will be able to fit velocity stacks in the box because of clearance to the inner fender, unless I am willing to modify it. At the rpm I operate at, I don't know if they would do anything. Revington supplies airboxes and fitments for additional fender clearance not cheap. https://www.revingtontr.com/shop/Co...ssid=W7R9U1F31T1F8MBTPR79AH4WHU2H14DF&CID=221 Anybody have any experience with this?
 
Not on a TR4/4a, but my TR8 was noticeably happier to get cold air from outside the car when I connected the factory intake which draws air from outside.
 
Back
Top