• Hi Guest!
    If you appreciate British Car Forum and our 25 years of supporting British car enthusiasts with technical and anicdotal information, collected from our thousands of great members, please support us with a low-cost subscription. You can become a supporting member for less than the dues of most car clubs.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

TR4/4A Cold air intake system

Share this page

TRMark

TRMark

Jedi Knight
Bronze
Country flag
Offline
Been thinking of building a cold air system for the TR. I see Moss has provides one for the MG. https://www.mossmotors.com/Shop/ViewProducts.aspx?PlateIndexID=120957 Thinking about just a simple box with a universal tube and filter attached. I don't think I will be able to fit velocity stacks in the box because of clearance to the inner fender, unless I am willing to modify it. At the rpm I operate at, I don't know if they would do anything. Revington supplies airboxes and fitments for additional fender clearance not cheap. https://www.revingtontr.com/shop/Co...ssid=W7R9U1F31T1F8MBTPR79AH4WHU2H14DF&CID=221 Anybody have any experience with this?
 
Not on a TR4/4a, but my TR8 was noticeably happier to get cold air from outside the car when I connected the factory intake which draws air from outside.
 
Back
Top