• Hi Guest!
    You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

cockpit surround fasteners?

Share this page

Z

zimasprite

Jedi Hopeful
Offline
Hey all,

What type of fasteners are used for the rear cockpit surround for a 68 sprite. I know the ends are those chrome finishers with the bolts w/those little snap-dot things(Tenax maybe??).

Thanks for the help.
 
Each side gets 3 Tenax studs, the originals had a 10/32 thread on them. 4 studs if you eliminate the velcro.
The replacement studs sold at VB are metric! Watch out for that. Across the back there are 7 snaps. Boat shops sell a self drilling snap stud in stainless. Don't get the long ones or you will have to nip off the end that sticks into the vinyl cap.
 
I should think that any boat canvis joint or West Marine should have these in stainless.
 
Back
Top