Clutch Pipe Adapter

[jhorton3]

In trying to fit the new clutch pipe to the replacement master cylinder I realized the connection wasn't going to work. The adapter was missing from the master. I tried to get the one out of my original master but broke it. Does anyone know where I can get a replacement, or what size both ends are? I've checked all the hardware stores and auto parts places in the area. I figure I'll have to source it from the Internet.

 

[Biff]

Moss or Vicky Brit.
Don't know the sizes, sorry.

 

[GB1]

If you can't find, it let me know, I have a box of old masters buried in my garage and one may have one.

 

[regularman]

I just went through this with a new master cyclinder. I bought a bunch of stuff and then found the Advance auto parts sells made up tubing with all kinds of ends made up. British to us, japanese to US, british to japanese, etc. That probably have exactly what you need with no adapter. They had what I needed. I was shocked as I never knew they had such things.

 

[jhorton3]

I tried the Advance store in my area and they didn't have anything that would work. What he pulled out was too shallow with only 3-4 threads secured. I found that Moss has the adapter, part #180-400. I guess I'll get it with my next parts order.

 

[regularman]

What they had at my advance was preflared 3/16 brake tubing with different types of flare nuts on the end. The british end one fit perfectly, screwed in a long way and sealed off.