Hey Guest!
Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
RickB
Yoda
Offline
I've put a choke cable on my dash and bought a pack of cable stops and various parts and pieces and can take some pieces from my MK1 Midget carbs as well.
<span style="font-weight: bold">Would there be a problem if I only set up the choke on the rear carb?</span>
Would it work?
This is just until I can either fab or buy the appropriate parts to connect both carb chokes.
BTW since I also had the leak from the oil pressure gauge I decided to pull the dash, wow that was certainly easy!!
Got to watch out for the "might as well" bug, keep the goal of driving this car in mind.
It had a vinyl 1/8" line to the brass compression fitting on the back of the gauge. I pulled it apart and cut the line and refitted, then I got interrupted by family duties (BBQ) and haven't started up the motor to see if the leak is fixed.
I need to figure out what wires go where behind that dash, for being so simple it's still a bit of a mystery to me which switch does what. I'm going to have to do some trial & error until I figure it out.
<span style="font-weight: bold">Would there be a problem if I only set up the choke on the rear carb?</span>
Would it work?
This is just until I can either fab or buy the appropriate parts to connect both carb chokes.
BTW since I also had the leak from the oil pressure gauge I decided to pull the dash, wow that was certainly easy!!
Got to watch out for the "might as well" bug, keep the goal of driving this car in mind.
It had a vinyl 1/8" line to the brass compression fitting on the back of the gauge. I pulled it apart and cut the line and refitted, then I got interrupted by family duties (BBQ) and haven't started up the motor to see if the leak is fixed.
I need to figure out what wires go where behind that dash, for being so simple it's still a bit of a mystery to me which switch does what. I'm going to have to do some trial & error until I figure it out.