-
Hey Guest!
British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!**Upgrade Now**
(PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
TR4/4A Can I fit a TR3 clutch plate&disc in a 4A?
- Thread starter karls59tr
- Start date
Share this page
Marvin Gruber
Yoda
Offline
Do you have a TR3 flywheel?
TR3driver
Great Pumpkin - R.I.P
Offline
With a late TR3 flywheel, TOB & carrier, I think it will fit. The front cover on the gearbox is about 3/8" shorter, but that doesn't seem to bother the TR3 setup.
The 4A flywheel would at least have to be redrilled and tapped to use the TR3 pressure plate; but I don't know offhand if that is possible or not. This is a machine shop operation, since it is important that the circle of holes is precisely centered on the axis of rotation.
The 4A flywheel would at least have to be redrilled and tapped to use the TR3 pressure plate; but I don't know offhand if that is possible or not. This is a machine shop operation, since it is important that the circle of holes is precisely centered on the axis of rotation.