• Hi Guest!
    If you appreciate British Car Forum and our 25 years of supporting British car enthusiasts with technical and anicdotal information, collected from our thousands of great members, please support us with a low-cost subscription. You can become a supporting member for less than the dues of most car clubs.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

Bugeye measurements

Share this page

Rut

Rut

Obi Wan
Country flag
Offline
Can anyone measure the rear of a Bugeye for me? I need the measurements using a straightedge running just above the tail lights and below the tail lights along the lower edge of the tag indention. This would be across the car with measurement taken at the left bumper mounting point, left edge of tag indention, middle of tag indention, right edge of tag indention, and the right bumper mounting point. I need to know the distance of the body from the straightedge.
thanks, Rut
 
Hay Rut come on down to P Cola car show this week end and measure all you wish.
 
Jack,
let talk my wife into a beach trip! Hope to see you Saturday.
Rut
 
Jack,
where is the P'cola show going to be? Wife gave me a green light and the weather looks good.
Rut
 
While you are in Pensacola see if you see any Malbecks. My mothers maiden name was Malbeck and she was born in Pensacola. To my knowledge there are no other Malbecks in the United States. My Mother was one of the last of them. She died at 93. if she were alive today she would be 108.
 
We had a great time at the Brits by the Bay, but I found out that the measurements cannot be taken with the rear bumpers and tag light in place! Can someone help a brother out?
Thanks, Rut
 
Back
Top