Bugeye leaf-spring removal

[David_Doan]

I'm in the process of removing the rear springs. The axle is out, now I just have to remove the springs. The jack-stands are currently under the spring plates.

where is the best place to support the rear end of the car while removing the springs?

Thanks,

David

 

[Rut]

David,
i left my jack stands under the spring plates and worked around them. Once you remove the nuts/bolts it should come apart pretty easy. I had a ton of dirt and debris, but no rust!
Good luck, Rut

 

[OopsClunkThud]

Same here, had to reposition the stands once to get at the bolts, but kept them at the spring plate.