• Hi Guest!
    You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

Bugeye jack handle

Share this page

The early jack handle just used a ratcheting arrangement that fit over a hex head bolt. Lot's of options but I imagine Kevin is trying to put together something for a concourse showing. All the spridget jacks were great at damaging the bodywork.

Kurt.
 
Thanks for the ebay lead, but it won't work for my jack, because it has a hex head. I know the stock jacks are tricky, but I just wanted a stock handle. Not sure if I would ever take the bug to a car show again (too much work) but you never know. I pretty much have everything stock, and this is the last part of the tools that I need.
 
The one on eBay is part number 2A5627 for AN5-501 to AN5-50116 chassis. They made a three legged jack that used a swivel type ratchet for later chassis.
 
Back
Top