• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Tips
Tips

broken oil cooler fitting

Share this page

P

prmac

Member
Offline
Hi all,
I posted earlier about a transmission problem in my 76 MGB. While dismantling to pull the engine the fitting on the oil cooler popped out. Is this fixable? I know they are not too expensive but tings are starting to add up.
Paul
 
Paul, you gonna a need a new oil cooler, they are not terribly expensive. One should always use two wrenches when removing the oil cooler line from the oil cooler, one on the hex of the fitting attached to the oil cooler and one on the oil line fitting, even then, if they been on there forever, the fitting on the oil cooler can still fail. British Parts NW has some good prices on the oil cooler, I would recommend you buy the smaller one. Hope this helps.
 
Back
Top