• Hi Guest!
    If you appreciate British Car Forum and our 25 years of supporting British car enthusiasts with technical and anicdotal information, collected from our thousands of great members, please support us with a low-cost subscription. You can become a supporting member for less than the dues of most car clubs.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

Bristleflex

Share this page

M

Millrat

Jedi Hopeful
Country flag
Offline
So I am convinced. I installed furflex on one door and it does make the bottom rear of the door stick out. It seems that it is too thick at the front and binds a little.

Anyway, I see that Moss lists bristleflex and was wondering if their price($150+) is inflated compared to ordering directly from Macgregor?
 
kalist said:
https://www.macgregorukcarparts.com/ Check there prices out here.
Click to expand...

The prices on his website are out of date. You must call him for the current prices. Also, he only takes VISA for a credit card. I had M/C and he sent the merchandise with an invoice to be paid by check. A little unusual, but it works for him, I guess.
 
Millrat said:
So I am convinced. I installed furflex on one door and it does make the bottom rear of the door stick out. It seems that it is too thick at the front and binds a little.

Anyway, I see that Moss lists bristleflex and was wondering if their price($150+) is inflated compared to ordering directly from Macgregor?
Click to expand...



Your door seal lip may be bent a little in the vicinity of the door check strap. I had to straighten there to stop the binding at the front. Also Macgregor current prices can only be determined by talking to him. Least that was my experience.

Kurt.
 
nomad said:
Millrat said:
So I am convinced. I installed furflex on one door and it does make the bottom rear of the door stick out. It seems that it is too thick at the front and binds a little.

Anyway, I see that Moss lists bristleflex and was wondering if their price($150+) is inflated compared to ordering directly from Macgregor?
Click to expand...



Your door seal lip may be bent a little in the vicinity of the door check strap. I had to straighten there to stop the binding at the front. Also Macgregor current prices can only be determined by talking to him. Least that was my experience.

Kurt.
Click to expand...
Did this solve the door sticking out at the bottom rear issue? The furflex seems to work otherwise.
Thanks,
Erik

Problem solved. Called Macgregor and had a great conversation, ordered the parts. Great guy!!
 
Back
Top