• Hi Guest!
    If you appreciate British Car Forum and our 25 years of supporting British car enthusiasts with technical and anicdotal information, collected from our thousands of great members, please support us with a low-cost subscription. You can become a supporting member for less than the dues of most car clubs.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips
Resource icon

Breather Hose Conversion 1.0

No permission to download
Overview History Discussion

Share this page

petnatcar

petnatcar

Senior Member
Country flag
Offline
petnatcar submitted a new resource:

Breather Hose Conversion for BT7 - Breather Hose conversion BT7

Hi Guys,
After years of enduring the giant mess caused by the OEM Blow-By system I decided to see if I could improve it.
Looking through a Stock Car Parts Catalog I noticed a blow-by system that made a lot of sense so I fitted one on the Healey engine.
The attached page is what I did and it's been running fine for the past 20 years with no leaks.
The purists may frown on this but it does work... and it looks pretty cool.

I believe it was Geoff Healey that said "any modifications or...
Click to expand...

Read more about this resource...
 
Works for me. You have to use the orange button on the link to download the resource. Main thing is that the breather is routed to an exhaust header instead of to the carb inlet.
 
Back
Top