-
Hey Guest!
British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!**Upgrade Now**
(PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
Brakes not releasing fully
- Thread starter SargeVT
- Start date
Share this page
Offline
Most master cylinders have a "bleed port" which is uncovered when the MC piston is fully retracted. This lets the fluid in the wheel cylinders/calipers flow back into the MC when the pedal is released.
If the pedal linkage is adjusted so that the MC can not travel back to it's fully released position, the bleed port will not be uncovered. This would apply to a boosted or unboosted MC.
If it was only one or two of the wheels not releasing, there are many tales of the rubber inner liner on a hose collapsing & forming a one way valve which will not let the attached cylinder release.
D
If the pedal linkage is adjusted so that the MC can not travel back to it's fully released position, the bleed port will not be uncovered. This would apply to a boosted or unboosted MC.
If it was only one or two of the wheels not releasing, there are many tales of the rubber inner liner on a hose collapsing & forming a one way valve which will not let the attached cylinder release.
D