• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Tips
Tips

Brake Warning Lite switch

Share this page

jerrybny

jerrybny

Jedi Knight
Offline
Does anyone happen to know where I might get the plastic connector that hooks up to the Brake warning light switch in the engine on a 73 TR6? The previous owner snipped the wire right at the connector so there is no way to splice a new wire in. I looked in Moss and Factory Roadster and Victoria British and I didn't see it. Thanks
 
Jerry,
Had the same problem on my 73 TR6, before I restored it. You might try one of the the many vendors that sell parts off retired Triumphs. Most TR web sites will list these guys. I ended up buying a replacement switch (cast iron) from Moss and it has served me well. Much larger than stock (either for a Spit or Jag, I think) but fits with a little fitting. Less than half a C note. But, my valve was shot so it was a no brainer for me.

Bill
 
Back
Top