• Hi Guest!
    You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.

    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

TR2/3/3A Brake system question -

OP
T

TR3-Stu

Senior Member
Bronze
Country flag
Offline
Ok, I'm starting to feel like an idiot. I was in the process of trying to bleed my new TR3 brake system (new lines, etc), and I wasn't having any success. I traced the problem back to the restrictor valve. Nothing was getting past the valve. Now I should know better, but I just reinstalled the original restrictor valve on the new brake line system. Big mistake. After I pulled it apart, it was completely corroded, and thus far, I have not been able to find anyone who is currently selling new restrictor valves. With so many knowledgeable TR owners in this forum, I know someone; 1. knows what the restrictor valve does; and 2. has a way forward.
Thanks in advance,
Stu
 
My apologies - I was tired and frustrated when I posted this question, and didn't do adequate research into previous posts on restrictor valves. After checking - I found plenty of information and an answer to my problem. Again, this forum is extremely helpful and I value it.
Thanks,
Stu
 
Back
Top