TR2/3/3A Brake Line Master to Banjo Connection LHD 56 TR3

[mgedit]

I finally tracked down a brake line from Automec and was about to try to install this morning. It seems to be much too long at something like 6 ft ... rough measurement looks like about 4 ft or so would be enough. Does anyone know offhand how long that pipe should be? Will contact Automec as well. I'd rather not have to cut and flare the pipe as I bought it specifically so that it would be correct as bought. Cheers, Mike

 

[sd80mac7204]

My notes that I found seem to call for a 6'11" piece of brake line between the brake master to the 5 way fitting

 

[mgedit]

Thanks very much. That begs the question as to what the correct routing should be to "use up" that much pipe. Cheers, Mike

 

[Jerry]

https://www.britishcarforum.com/bcforum/u...rake#Post867136

This might help also. Has pictures of the routing.

By the way, has anyone put a brake Servo to assist braking on a TR3?? Where was it installed?

Jerry

 

[mgedit]

Thanks Jerry. Cheers, Mike