• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Tips
Tips

TR2/3/3A Brake Caliper Piping

Share this page

M_Pied_Lourd

M_Pied_Lourd

Darth Vader
Country flag
Offline
Would someone be able to post a picture of how the brake piping is supposed to look on the Brake caliper for a 59 TR3A. I am specifically looking at how to install the cross tube properly. On the 2 60's that I have, the pipe runs over the top of the caliper...looking at the 59, the pipe is tucked under the nose of the caliper.

Cheers
Tush
 
This should help.

Fig%2033%20Brake%20Caliper.jpg~original


BTW, your 60s shouldn't have the cross-over pipe at all. The change to the later split calipers was in 59, TS56377 according to Piggott. Evidently someone has installed earlier calipers and not routed the pipe properly.

Be sure to check for clearance between the pipe and installed wheel. You don't want this!

Hardlineabrasion-cropped.jpg~original
 
Hi Randall,

Thanks very much. My 59 looks like the top picture. You are right, my 60s looks like the bottom....earlier calipers with the pipe running on top...gotta fix that!

Cheers
Tush
 
Back
Top