Hey there Guest!
A '67 Sprite would have come from the factory with a 1275. Do your air cleaners have rounded corners or beveled corners? They changed styles to provide more clearance.
Hi Rick, I have just shared a photo where u can see the paint has worn off the air cleaner.
Would you know what the engine mount thickness should be??
Hi, my newly purchased 67 sprite is running 175/80/13 tyres with not much clearance on the rear guard. Original tyres apparently were 145’s. Is anyone running 155’s and how does that size handle?
With 155's the car will be more "tossable" than with 175's. More fun in my opinion.
Did you find the problem MF
Not as yet Madflyer, I have replaced the rear bonnet rubbers and slightly adjusted the bonnet which has taken an annoying squeak out of it whilst driving which I’m happy about. For a temporary measure I stuck a soft rubber stopper under the bonnet only 5 mm thick so it doesn’t keep rubbing on the air cleaner which seems to be working until further investigation .
A friendly reminder - be careful what links you click on here. If a link is posted by someone you don't know, or the URL looks fishy, DON'T CLICK. Spammers sometimes post links that lead to sites that can infect your computer, so be mindful what you click.
Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
