• Hi Guest!
    You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

BN2 Trunk Seal

Share this page

M

musme

Senior Member
Offline
The BN2 trunk seal has a specific shape. On one side it has a shallow figure
and
on the other side it looks like a piramid. How should I glue the seal ??
Thanks,
Jose
 
Jose I'll check but I think the longer edge goes to the outside to catch the lip of the shroud.....
 
Jose,

I looked at the seal, it's symmetrical with the exception of a sharp edge and rounded edge. The sharp edge is to the outside...

Hope that helps.....
 
Back
Top