BN1 I.D plate location

[zblu]

Can anybody come up with some measurements as to where the plate should be affixed in the cockpit? Its on the side of the footwell

 

[artking]

As measured (with all carpeting in place), the metal plate lower edge is 9 in. up from the rail, or 11 1/2 in. up from the floor. The right edge is 14 1/4 in. back from the vertical panel at the front of the foot space, or the left edge is 2 3/8 in forward of the door opening midway up the plate.

 

[zblu]

Thanks Artking, mines a '53 with the plastic I.D plate, still I suppose they were placed in much the same position!, the plates about 3" and a bit sideways and about 2" high