• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)

BJ8 window removal

Share this page

tahoe healey

tahoe healey

Yoda
Offline
I need a safe way to remove the glass on the triangular window. I am replacing the glazing rubber. The old stuff is dry and hard and I do not want to damage the glass. Will a penetrating oil work? I guess soapy lubricant to re-install?
TH
 
Warm water and soap can't hurt. I can't remember what I did when I replaced mine. Wasn't too hard. I believe I used a thin flat blade screw driver on the glass edge and slowly pried the frame off.

Marv
 
HI TH, Try any type of thin oil and a little heat from a heat from" heat gun/hairdryer.
 
Back
Top