BJ8 Rear Seat Back Upholstery Hardware

[crispy]

I'm in the process of reupholstering my rear seatback. I'm searching for some very small (#4?) washers that I think are called "flush mount finish washers". They appear to be nickel plated brass. I'm coming up empty. Have any of you found a source for these...or possibly have a few on hand that you'd be prepared to part with? I've attached a picture for reference. Thanks for your help.

 

[roscoe]

Quick Google search. This is probably what you are looking for. They are # 6.

Flush Type Washers | Upholstery Supply USA

buy flush washers

www.upholsterysupplyusa.com

 

[red57]

Bolt Depot shows #4 finish washers in 316 stainless and brass > Washers - Bolt Depot <

 

[roscoe]

There are several styles of countersunk finishing washers. The kind that is stamped to stand proud of the contact surface are usually for hard surfaces. The kind that are essentially a funnel shape with no spout, i.e. a truncated cone, are only suited for soft compressible surfaces such as upholstey. The latter style, as in your photo, will not cut the material and have a smaller diameter.

 

[crispy]

I have sourced some #6’s…they’re too big. Hence my search for #4. Bolt depot doesn’t stock the “flush style cup type washers” in any size as far as I can tell.
I can’t be the 1st guy down this path…

 

[John Turney]

Are they like these: Screw & Washer Set for Panels

 

[BLong63AH]

Is it like this? these are countersunk though

Countersunk Finish Cup Washers Solid Brass

Countersunk Finish Cup Washers Solid Brass at Fastenere.com

www.fastenere.com

 

[crispy]

Thanks John…yes, they are similar to those. Although, I suspect they are too big. Nonetheless I’ll give moss a call on Monday to find out. Thanks for the lead.