Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
Question concerning BJ8 gearbox. I wish to know the clearance or tollerance of the sliding hub for second gear. Whith reference to the Moss parts catalouge, page 58, item number 40(gear,first,SLIDING HUB).If I am correct the Austin Healey manual gives this tollerance(end float) as.007", what would be the maximum allowable. Is there any way to reduce this end float after fitting a new syncro ring,or is it not worth considering. thanks trevor S
-
Hi Guest!
You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.
There are some perks with a member upgrade!**Upgrade Now**
(PS: Subscribers don't see this gawd-aweful banner
BJ8 gearboxBJ8 Gearbox
- Thread starter saltiga
- Start date
Share this page
Keoke
Great Pumpkin
Offline
saltiga:
I do not think you will be confronted with any clearance problem provided:
1] The shift lever gates are in good condition
2] The buffer pad is installed in the bell housing and is in good condition
3] the shifter rail ,it's detent and locating ball/ spring assembly are in good condition
4] The brass shifter has not become excessively worn
---Keoke
I do not think you will be confronted with any clearance problem provided:
1] The shift lever gates are in good condition
2] The buffer pad is installed in the bell housing and is in good condition
3] the shifter rail ,it's detent and locating ball/ spring assembly are in good condition
4] The brass shifter has not become excessively worn
---Keoke