Hey Guest!
Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
AUSMHLY
Yoda
Offline
What's the height of the original front rubber bump stops. I received a set from Moss today. Moss ones are 2 1/2", ones that were in my car were 3 1/2"
My understanding is the bump stops are there just in case the car bottoms out. So they should not come in contact very much. Well it seems the bump stops have been making contact, for both are cracked and split open. Don't know if they were the originals from 64 or not. Hence why I'm asking what the original size was.
If the correct size is 3 1/2" and I now have stops that are one inch shorter, I am concerned that the 2 1/2" may not make contact if the coilspring gets fully compressed.
Anyone have 2 1/2" stops in their car? Is it big enough to keep the spring from compressing fully?
I happened to measure the coilspring while it was out. It's 10".
Assuming that's correct, unless someone says differently.
My understanding is the bump stops are there just in case the car bottoms out. So they should not come in contact very much. Well it seems the bump stops have been making contact, for both are cracked and split open. Don't know if they were the originals from 64 or not. Hence why I'm asking what the original size was.
If the correct size is 3 1/2" and I now have stops that are one inch shorter, I am concerned that the 2 1/2" may not make contact if the coilspring gets fully compressed.
Anyone have 2 1/2" stops in their car? Is it big enough to keep the spring from compressing fully?
I happened to measure the coilspring while it was out. It's 10".
Assuming that's correct, unless someone says differently.
