• Hi Guest!
    If you appreciate British Car Forum and our 25 years of supporting British car enthusiasts with technical and anicdotal information, collected from our thousands of great members, please support us with a low-cost subscription. You can become a supporting member for less than the dues of most car clubs.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

BJ7 Window channel position

Share this page

G

grimes6

Senior Member
Country flag
Offline
I am just in the process of fitting the frame to my windows on my BJ7 . The window channel is not attached and I need to know its position on the bottom frame. Attached is the channel in question.

Many thanks
Greg
 

Attachments

  • window_channel.jpg
    window_channel.jpg
    65.5 KB · Views: 136
If my memory is near correct, this piece has some adjustability to it. It is tapped unto the bottom metal frame of the window glass. put the window either all the way up or all the way down and see where the arm and this pieces meets it. this piece can be moved horizontally somewhat to get perfect actuation of the glass. the object is to get the window to travel its complete travel without the sliding arm coming free of this piece. May be some trial and error to get it right.
Hope this helps a little.
 
Back
Top