• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
  • When posting a classified ad, you MUST select a prefix from the drop-down next to the subject line. If you don't you will get an error and your ad will not be posted!
Tips
Tips

Bent Frame

Share this page

M

MichiganTed

Senior Member
Offline
Put the body shell on a rotisserie two weeks ago and just noticed today the front frame horns are bent upward just behind the rear A frame mount points. Both sides are bent very nearly the same, about 2" at the front of the vehicle if I eyeball a straight line. I took a few pics but they don't illustrate the issue well.

Is this common? I can't imagine what you have to hit or how you'd have to hit it to do that kind of damage.
 
The front frame rails are bent up purposly. If you were to straighten them up, you would throw your steering and alignment way off. This has startled a lot of people over the years. Legend has it a few people have even taken the time and effort to straighten them out only to find out afterward that they have done serious damage tothe car.
 
Ted,
They come that way from the factory, about an inch or so of upward bend. I believe this is how the caster is set.
Rut
 
Back
Top