• Hi Guest!
    You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

Been a while

Share this page

ronzet

ronzet

Jedi Knight
Offline
Hey LBC fans....

Happy New Year to you all..

My stable (of two cars) has been reduced to one.... Owing to some business problems and a need to gather a few dollars.. My '57 MGA is now owned by another..

Ah well... Maybe I'll do a TF or a Y Saloon when my fortunes turn around.

I do have a question about windshield wiper assemblies....

How do you remove the blade drive assembly from the cable/tube??

The original unit on my '66 B is stripped at the blade arm mount and I have a good one that I want to install but for the life of me can't figure out how to remove it from the cable....

Thanks
 
At the engine end, there's a round 'nut' you take off the motor...at the arms themselves, you have to loosen the 2 halves up under the cowl (or possibly take them off) as the housings hold the tube in place.
 
Ron... you're alive....

Thought I saw your A for sale on Craigslist. Sorry to hear that you had to get rid of it but at least you still have one MG. Work on my A has not progressed at all, having been delayed by a project Miata, although I feel the start is getting closer.
 
Simon,

Thanks for the reply... I still need to get over to see your A...

My B runs very nicely after the engine rebuild... The body and interior, however, are much the worse for wear...
 
Back
Top