• Hi Guest!
    If you appreciate British Car Forum and our 25 years of supporting British car enthusiasts with technical and anicdotal information, collected from our thousands of great members, please support us with a low-cost subscription. You can become a supporting member for less than the dues of most car clubs.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

TR4/4A B post to sill

Share this page

S

shoopal

Jedi Trainee
Country flag
Offline
Hi everybody
Can someone enlighten me as to what covering goes over the B post to sill reinforcement plate? I am confused with the description "gusset" on Moss 802-070.
Thanks
Al Shoop
 
Well, on the TR6, there is a little cardboard backed, and colour matched vinyl piece that is glued over the top of it.

Cheers
Tush
 
M_Pied_Lourd said:
Well, on the TR6, there is a little cardboard backed, and colour matched vinyl piece that is glued over the top of it.

Cheers
Tush
Click to expand...

believe the same on my TR4A. The Roadster Factory ought to be able to enlighten you - their interior kits seem to be the best when in cones to completeness and accuracy.
 
Good tip on TRF site. Doesn't seem that the door post reinforcement cover is sold separately for TR4, but is sold for TR6 #621881 for $10.
I need a piece of blue vinyl to do a mouse repair so I think that cardboard with a vinyl cover glued is easy enough to fabricate. Not sure that TR6 part would fit anyway.
Anyone?
 
I wish that I had my TR4 home to compare but it’s in storage....I can’t imagine that it would change much through the years so I would think that the TR6 one would work or could easily be made to work.

Cheers
Tush
 
Back
Top