Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
Sr_Pinguino
Freshman Member
Offline
Hi, I see from the Parts List that the AH 100 has UNF and BSF threads, and perhaps others as well. Would someone please explain the significance of UNF and BSF threads? Thanks very much in advance.
-
Hi Guest!
If you appreciate British Car Forum and our 25 years of supporting British car enthusiasts with technical and anicdotal information, collected from our thousands of great members, please support us with a low-cost subscription. You can become a supporting member for less than the dues of most car clubs.
There are some perks with a member upgrade!**Upgrade Now**
(PS: Subscribers don't see this gawd-aweful banner
Austin Healey UNF and BSF
- Thread starter Sr_Pinguino
- Start date
Share this page
Roger
Luke Skywalker
Offline
UNF = Unified Fine, which is what I've found people here in the US often call SAE or Standard Fine. Anyway, it's the normal American fine thread.
BSF = British Standard Fine, which is what was the standard fine thread in Great Britain and a few other parts of the World (where they weren't Metric)until just after WWii, when UNF was adopted to make exchangeability easier.
You might also find:
UNC = Unified Coarse, the standard coarse thread you find in every US hardware store.
BSW = British Standard Whitworth, the old standard British coarse thread.
BA = British Association,a fine thread standard used mostly for smaller sizes and common in electrical and carburation systems.
BSP = British Standard Pipe, used as the name implies for certain pipe connections.
All of the above differ in one or more ways, be it in thread pitch or form, and have differing head sizes. The significance is that you need several sets of wrenches, sorry, though generally one set for BSF and BSW, one for UN threads, and a few small ones for BA.
BSF = British Standard Fine, which is what was the standard fine thread in Great Britain and a few other parts of the World (where they weren't Metric)until just after WWii, when UNF was adopted to make exchangeability easier.
You might also find:
UNC = Unified Coarse, the standard coarse thread you find in every US hardware store.
BSW = British Standard Whitworth, the old standard British coarse thread.
BA = British Association,a fine thread standard used mostly for smaller sizes and common in electrical and carburation systems.
BSP = British Standard Pipe, used as the name implies for certain pipe connections.
All of the above differ in one or more ways, be it in thread pitch or form, and have differing head sizes. The significance is that you need several sets of wrenches, sorry, though generally one set for BSF and BSW, one for UN threads, and a few small ones for BA.