Hi Guest!
Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
Hello;
Purchased the above Burlen part number EPK 12EN to convert points to solid state. Got it assembled and running as per the instructions and tested getting about 3 PSI and it did not take long to fill a 12 oz. soda can!
Trouble is the pump runs does not stop as the points setup did when the float chambers are full. Not sure if this is typical & might need more adjustment.
I tried calling Burlen but they are closed until the new year hence my inquiry on this forum.
Thanks in advance,
Andrew
Purchased the above Burlen part number EPK 12EN to convert points to solid state. Got it assembled and running as per the instructions and tested getting about 3 PSI and it did not take long to fill a 12 oz. soda can!
Trouble is the pump runs does not stop as the points setup did when the float chambers are full. Not sure if this is typical & might need more adjustment.
I tried calling Burlen but they are closed until the new year hence my inquiry on this forum.
Thanks in advance,
Andrew