• Hi Guest!
    If you appreciate British Car Forum and our 25 years of supporting British car enthusiasts with technical and anicdotal information, collected from our thousands of great members, please support us with a low-cost subscription. You can become a supporting member for less than the dues of most car clubs.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

Attaching Hardura

Share this page

Rut

Rut

Obi Wan
Country flag
Offline
I'm in the process of installing the Hardura rear covering and I'm going to attach it with snaps, but I need to attach the 2 pieces that mount on the wheel well arches...what's the best/factory way? I've considered contact cement and headliner adhesive, but I'm not sure if that's the best way to go. Thoughts?
Thanks, Rut
 
Rut
I used 3M spray adhesive to attach mine. I think the headliner adhesive would work fine. I installed seat belts in my car, if you are going to do this you might want to do that first. Gerard has instructions on his web page.
Paul
 
Back
Top