• Hi Guest!
    You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

Anyone in the Midwest rebuild the combo gauge

Share this page

Shealey

Shealey

Jedi Trainee
Offline
I did a search and checked the supporting vendors list. I didn't see any specific listing. I could send mine out to Nisonger Instruments in NY but would rather use a midwest source. Really, I guess it doesn't matter..
 
Look at my thread "63 Midget Instruments"....if you need any of those business' contact info, lemme know.
 
Very Cool, Thanks! Hey, after I posted this I thought I should at least test my gauge to see if the bulb was in the failure mode. I boiled some water and dunked the bulb and the gauge jumped to life. In order to get it to come back to rest on the cold stop pin, I had to run it under cold water. But it works! Cool!
 
Back
Top