-
Hey Guest!
British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!**Upgrade Now**
(PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
anyone have spridget CAD drawings?
- Thread starter RobSelina
- Start date
Share this page
lesingepsycho
Jedi Warrior
Offline
I made a 3D model of a bugeye but I lost it when my computer crashed /ubbthreads/images/graemlins/cryin.gif
I used a raster image which I got here (web page) from which I traced and then made extrusions which I then made as intersections to get the compound curves of the car. It was still kinda rough but I was doing it just for the fun of it. Let me know if you come up with something.
JACK
I used a raster image which I got here (web page) from which I traced and then made extrusions which I then made as intersections to get the compound curves of the car. It was still kinda rough but I was doing it just for the fun of it. Let me know if you come up with something.
JACK
OP
RobSelina
Jedi Warrior
Offline
a top and side image like that for a later model car would be perfect. I really just want to see the dash, rear deck etc so I can plan mounting points.
Worst case I'll take some shots of the car, trace some major lines off of it and then back everything up with a tape measure. Just more time consuming.....
Worst case I'll take some shots of the car, trace some major lines off of it and then back everything up with a tape measure. Just more time consuming.....
Morris
Yoda
Offline
While wasting my employer's money, I came across this:
https://www.the-blueprints.com/modules/bpview/bpview.php?nr=1068
Dimensions seem a bit off to me, but it's a start.
https://www.the-blueprints.com/modules/bpview/bpview.php?nr=1068
Dimensions seem a bit off to me, but it's a start.
Re: anyone have spridget CAD drawings? MORE>>>>>>>
Add these also........
https://www.the-blueprints.com/modules/bpview/bpview.php?nr=9284
AND nr=5796
AND nr=9286
"""""""I'd like to play with my roll bar design a little.... """""""
Be a plumber and electrician.
Plastic pipe and grey electrical sweeps are cheap. Crazy glue or pvc dope. Sit in the car which is hard to do in a CAD drawing. Use the forms to do the actual bending....or maybe do a lightweight and paint all the plastic black metallic!! /ubbthreads/images/graemlins/cheers.gif
Add these also........
https://www.the-blueprints.com/modules/bpview/bpview.php?nr=9284
AND nr=5796
AND nr=9286
"""""""I'd like to play with my roll bar design a little.... """""""
Be a plumber and electrician.
Plastic pipe and grey electrical sweeps are cheap. Crazy glue or pvc dope. Sit in the car which is hard to do in a CAD drawing. Use the forms to do the actual bending....or maybe do a lightweight and paint all the plastic black metallic!! /ubbthreads/images/graemlins/cheers.gif
JamesWilson
Yoda
Offline
[ QUOTE ]
While wasting my employer's money, I came across this:
https://www.the-blueprints.com/modules/bpview/bpview.php?nr=1068
[/ QUOTE ]
What an interesting site... lots and lots of cars there besides spridgets....
Thanks.
While wasting my employer's money, I came across this:
https://www.the-blueprints.com/modules/bpview/bpview.php?nr=1068
[/ QUOTE ]
What an interesting site... lots and lots of cars there besides spridgets....
Thanks.