• Hi Guest!
    If you appreciate British Car Forum and our 25 years of supporting British car enthusiasts with technical and anicdotal information, collected from our thousands of great members, please support us with a low-cost subscription. You can become a supporting member for less than the dues of most car clubs.
    There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Subscribers don't see this gawd-aweful banner
Tips
Tips

Another BJ7 Wiring Question

Share this page

Griz

Griz

Jedi Hopeful
Country flag
Offline
OK, so I've verified that I ordered the correct Control Box (voltage regulator) for my BJ7 from Moss (P/N 142-001). It has terminals marked A1, A, F, D, and E. My BJ7 wiring diagram for the Control Box has terminals labeled B, F, WL, D, and E. My new wiring harness has (1) Black, (2) Brown (one wire heavier gage than the other), (2) Yellow (again one wire heavier than the other), (1) Yellow with Green tracer, and (1) Brown with Blue tracer that are meant to attach to the Control Box. Would one of you BJ7 guys please take a look and tell me what wires land where? Much appreciated! Griz
 
4800-Controlbox2.jpg

The top diagram was correct for my BJ7
 
Back
Top