-
Hi Guest!
You can help ensure that British Car Forum (BCF) continues to provide a great place to engage in the British car hobby! If you find BCF a beneficial community, please consider supporting our efforts with a subscription.
There are some perks with a member upgrade!**Upgrade Now**
(PS: Subscribers don't see this gawd-aweful banner
Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
Alu carpet cover
- Thread starter NIB
- Start date
Share this page
Randy Forbes
Yoda
Offline
Which one; the threshold plate, or the one protecting the windlace?
Part no. 5 and 6 in this picture.
https://www.ahspares.co.uk/images/products/DRF.gif
https://www.ahspares.co.uk/images/products/DRF.gif
Randy Forbes
Yoda
Offline
I'm just not finding a clear picture; this is on my BN6, but as you can see, the position is dictated by the door opening and the cross-section of the windlace. So, with the weatherstip in place, center the aluminum piece over the top and drill the three (3) holes. Pretty sure I used a #47 (42?) drill bit.
Here's an *accidental* shot that barely shows the rear of the trim on a BJ8:
Now that we know what you're looking for, someone here will post up a better picture for you :wink:
Here's an *accidental* shot that barely shows the rear of the trim on a BJ8:
Now that we know what you're looking for, someone here will post up a better picture for you :wink: