Hey Guest!
Hey - did you know if you click on the title of a thread it will take you to the first unread post since you last visited that thread?
but were afraid to ask: 
STOP!! Never post your email address in open forums. Bots can "harvest" your email! If you must share your email use a Private Message or use the 
smilie in place of the real @
Pretty Please - add it to our Events forum(s) and add to the calendar! >> 
I have to following question how to approach.
After the front frame has been repaired, there is the following project to carry out.
When we look at the attached pictures it seems to me, that the driver’s side seems original to me and was never taken apart. ( picture 1)
When I look at the picture of the valence at the passengers side I notice, that some material was added to make it wider. I assume the first thing is to make left and right of te valence identical.
On picture 3 I noticed a kind of edge at the bumper. Is this original or just fabricated by the previous owner.
I am wondering how this issue would be approached
I will open an other thread for the grille question in the same area
After the front frame has been repaired, there is the following project to carry out.
When we look at the attached pictures it seems to me, that the driver’s side seems original to me and was never taken apart. ( picture 1)
When I look at the picture of the valence at the passengers side I notice, that some material was added to make it wider. I assume the first thing is to make left and right of te valence identical.
On picture 3 I noticed a kind of edge at the bumper. Is this original or just fabricated by the previous owner.
I am wondering how this issue would be approached
I will open an other thread for the grille question in the same area
