• Hey Guest!
    British Car Forum has been supporting enthusiasts for over 25 years by providing a great place to share our love for British cars. You can support our efforts by upgrading your membership for less than the dues of most car clubs. There are some perks with a member upgrade!
    **Upgrade Now**
    (PS: Upgraded members don't see this banner, nor will you see the Google ads that appear on the site.)
Tips
Tips

TR4/4A Adapter that connects Clutch MC to the pipe that goes to the slave cyl?

Share this page

K

karls59tr

Obi Wan
Bronze
Country flag
Offline
Anyone know what the thread sizes are for this adapter. Could I find something like this locally rather than waiting to get one from the Big 3 or is this item specific to Brit cars?
 
DanB said:
It has an adapter? I don't remember that.
Click to expand...

I don't know about the TR4 but I put a new master that came with a fitting (perhaps to convert to standard tubing) on a TR3 but I simply took it out and screwed the original line directly into the cylinder. Is this similar to what you mean?
master cylinder.jpg
Tom
 
Be careful about taking out the adapter and just screwing in the original line. Look down into where the adapter fits and see if it has the same seat configuration as the old M/C. I just went through this with my car, and had to wind up using the supplied adapter.
 
I didn't know the new MC's came with an adapter. This is what I was looking for Moss 589-140. Wanted to find a local source so I could bleed the system right away but guess I'll buy one from Moss. Thanks for your replies.
 
Back
Top